Tables

It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.

It attaches to our 5' and 8' instructor desks. Crafted from solid oak, oak and hardwood veneers (same as the instructor's desk). It is finished with a chemical resistant, earth-friendly UV finish. The side desk features one 13-1/2"W x 18"D x 10-1/4"H file drawer, two 13-1/2"W x 18"D x 4"H storage drawers and one 19-1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14-1/2"W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The unit can be attached to either the right or left side of the instructor desk.

This unique L-Shaped unit is designed so four students can use the workstation while facing the teacher. It has storage on the peninsula and on the wall. It is made of oak and oak veneers with black accents. The unit can be ordered with a 1" epoxy resin top. Three sink options are available: epoxy sink (18"L x 15"W x 7.9"D) on the wall section, epoxy sink (16"L x 8"W x 6.8"D) in the peninsula or a no sink option. Units with sinks include cold water fixtures (call for quote if gas is needed). All units include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly chemical resistant UV finish. Assembly and installation of electricity and plumbing is required. Wall portion measures: 90"W x 14"D; peninsula extends: 96"; Overall size: 110"D x 90"W x 36"H.

This unique L-Shaped unit is designed so four students can use the workstation while facing the teacher. It has storage on the peninsula and on the wall. It is made of oak and oak veneers with black accents. The unit can be ordered with a 1" epoxy resin top. Three sink options are available: epoxy sink (18"L x 15"W x 7.9"D) on the wall section, epoxy sink (16"L x 8"W x 6.8"D) in the peninsula or a no sink option. Units with sinks include cold water fixtures (call for quote if gas is needed). All units include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly chemical resistant UV finish. Assembly and installation of electricity and plumbing is required. Wall portion measures: 90"W x 14"D; peninsula extends: 96"; Overall size: 110"D x 90"W x 36"H.

This unique L-Shaped unit is designed so four students can use the workstation while facing the teacher. It has storage on the peninsula and on the wall. It is made of oak and oak veneers with black accents. The unit can be ordered with a 1" epoxy resin top. Three sink options are available: epoxy sink (18"L x 15"W x 7.9"D) on the wall section, epoxy sink (16"L x 8"W x 6.8"D) in the peninsula or a no sink option. Units with sinks include cold water fixtures (call for quote if gas is needed). All units include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly chemical resistant UV finish. Assembly and installation of electricity and plumbing is required. Wall portion measures: 90"W x 14"D; peninsula extends: 96"; Overall size: 110"D x 90"W x 36"H.

This unique L-Shaped unit is designed so four students can use the workstation while facing the teacher. It has storage on the peninsula and on the wall. It is made of oak and oak veneers with black accents. The unit can be ordered with a 1" epoxy resin top. Three sink options are available: epoxy sink (18"L x 15"W x 7.9"D) on the wall section, epoxy sink (16"L x 8"W x 6.8"D) in the peninsula or a no sink option. Units with sinks include cold water fixtures (call for quote if gas is needed). All units include a pop-up duplex electrical outlet. Finished in natural oak with an earth-friendly chemical resistant UV finish. Assembly and installation of electricity and plumbing is required. Wall portion measures: 90"W x 14"D; peninsula extends: 96"; Overall size: 110"D x 90"W x 36"H.

This table has everything you could want. It adjusts easily from 27-3/4" to 39"H (42" with included spacer) in 2 cm increments in less than 30 seconds without the use of tools. Its apron is solid maple or oak and finished with a chemical resistant finish. It has a riser that provides extra workspace for each person to put his or her tools or laptop. The table has three top options: plastic laminate, chemical resistant laminate and phenolic resin. The riser’s horizontal surface matches your choice of top surface. The 12"D riser is supported by six 1" diameter powder coated steel tubes. The riser is 10" above the table surface. Tabletop measures 30"D x 60"W.

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Available in a variety of sizes, with several different top materials. Constructed of solid maple and finished with an earth-friendly UV finish. Aprons are constructed of solid maple and are 13/16"D x 4-1/2"H with heavy-duty 13-gauge steel corner braces. The unit has solid 2-1/4" maple legs with 5/16" hanger bolt installed, and are attached to the table with nuts and washers (supplied). All tables include leg boots and levelers. Choose from plain or book compartment apron. Standard height is 30"H. Other sizes and options are available, call for more information. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)

Plain Apron Tables are available in a variety of sizes, with several different top materials. These tables are built for years of dependable service. Legs and aprons are constructed of solid red oak, and are smoothly machined. They are finished with a chemical resistant, earth-friendly UV finish. Aprons are constructed of solid red oak and are 13/16"Dx4-1/2"H with heavy-duty 13-gauge steel corner braces. 2-1/4" square solid oak legs, with 5/16" hanger bolts installed, are attached to apron with nuts and washers supplied. All tables are equipped with non-skid adjustable glides for precise leveling and for prevention of rocking on uneven floors. Tables are supplied with black rubber leg boots which offer protection against scuffing and chemical spills. Standard table height is 30" with a weight capacity of 500 lbs. (Shipped KD with tops attached)