Science Labs

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Provides work space for up to four-students while storing your laboratory equipment in these perimeter workstations. Choose from 4 different configurations (see below). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction finished with a chemical resistant, earth-friendly UV finish. Each unit includes: your choice of 1" epoxy resin or 3/4" phenolic resin top with back splash, solid epoxy drop-in style sink with strainer, 2 combination cold water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and dovetailed drawers and rubber base molding. Assembly and installation of electricity and plumbing is required. Sink measures: 12"W x 8"D x 6"H. Unit measures 90"W x 84"D x 36"H. Work surface on wall portion is 18"D.

Blue steel safety cabinets for corrosives have the same quality safety features as the cabinets for flammables. This unit comes with double-wall construction, dual vents, grounding wire connections, adjustable shelves, leakproof sills, three-point self-latching doors and leveling feet. Manual-close doors opens to a full 180 degrees and self-latches when pushed closed. It includes polyethylene trays attached to galvanized steel shelves and a separate polyethylene liner for the bottom sump resist aggressive chemicals. Easily remove the liner for quick cleaning of drips and leaks. An all epoxy baked-on powder-coat finish, inside and out, provides increased chemical resistance. Cabinet meet OSHA and NFPA 30. 

Constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2” (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Fail-safe closing mechanism ensures three-point stainless steel bullet latching system works every time. Galvanized steel shelves direct spills to back. Cabinets also feature dual vents with flame arresters, four adjustable self-leveling feet, grounding connector, and trilingual warning label. Durable lead-free epoxy/polyester powder-coat finish provides excellent chemical resistance. Self-close door(s) shuts and latches automatically when a fusible link melts at 165°F (74ºC) under fire conditions. 

Constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2” (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Fail-safe closing mechanism ensures three-point stainless steel bullet latching system works every time. Galvanized steel shelves direct spills to back. Cabinets also feature dual vents with flame arresters, four adjustable self-leveling feet, grounding connector, and trilingual warning label. Durable lead-free epoxy/polyester powder-coat finish provides excellent chemical resistance. Manual-close door(s) opens to a full 180 degrees and self-latches when pushed closed.

This sink is the complete package. It comes complete with a lead free splash mount mixing faucet. The sink includes the mounting bracket and drain. The drain measures 1-7/8". Made of T-304 Stainless Steel. NSF Approved.

18 gauge T-430 stainless steel drain board attaches to the budget compartment sinks. The drain boards come with self tapping screws and are easy to attach and detach.

20 gauge T-430 stainless steel budget sinks have 1-1/2" rounded front and side edges. The 1-5/8" galvanized legs have adjustable high impact corrosion resistant feet. The sinks have 3-1/2" drains and accommodate 8" over counter splash mount faucets. Usfixture #250784. (faucet is not included) This sink is not NSF approved.

19 gauge T-430 stainless steel budget sinks have 1-1/2" rounded front and side edges. The 1-5/8" galvanized legs have adjustable high impact corrosion resistant feet. The sinks have 3-1/2" drains and accommodate 8" over counter splash mount faucets. Usfixture #250784. (faucet is not included) This sink is not NSF approved.

18 gauge T-430 stainless steel budget sinks have 1-1/2" rounded front and side edges. The 1-5/8" galvanized legs have adjustable high impact corrosion resistant feet. The sinks have 3-1/2" drains and accommodate 8" over counter splash mount faucets. Uses fixture #250784. (faucet is not included) This sink is not NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

High quality stainless steel sinks for your toughest cleaning tasks. Whether you need a drain board model or a stainless steel utility/prep basin, we have the right model for you. These one, two and three compartment sinks are perfect for washing, rinsing, and sanitizing. The 1-1/2" rounded front and side edges help contain splashes. The 18 gauge T-304 Stainless Steel is NSF certified and boosts optimum strength and durability. These sinks are safe for food prep. Stainless sinks all come with 1-5/8" galvanized legs with 1" adjustable high impact corrosion resistant feet, accommodate 8" on center faucets and have a 9” back splash. Select models come with 1/4" pitched drain boards to ensure proper drainage. Each sink has a 3-1/2" drain included. 36"H at sink front, 43-3/4"H at top of back splash. Uses fixture #250784. NSF approved.

Constructed of sturdy 18-gauge (1-mm) thick double-wall, welded steel with 1-1/2” (38-mm) of insulating air space for fire resistance. High-performance, self-latching doors close easily and securely for maximum protection under fire conditions. Fail-safe closing mechanism ensures three-point stainless steel bullet latching system works every time. Galvanized steel shelves direct spills to back. Cabinets also feature dual vents with flame arresters, four adjustable self-leveling feet, grounding connector, and trilingual warning label. Durable lead-free epoxy/polyester powder-coat finish provides excellent chemical resistance. Manual-close door(s) opens to a full 180 degrees and self-latches when pushed closed.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Solid steel dog in the front jaw, when used in conjunction with a bench stop, allows oversize work to be held securely on the bench top. Machined, toed-in jaws provide a solid grip, while steel no-pinch handles provide adequate clamping pressure. The front and back jaws are drilled and tapped or counter-sunk holes to allow for optional wood facing. Vises easily fit any bench up to 3" thick. Installation template included.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

Storage Cabinet Tables are constructed of solid oak and hardwood veneers, this table features a center cabinet with lock, and rubber base molding. This table is available with plain or book compartment aprons and comes in both single (2-student) and double faced (4-student) models. The center cabinet is available with two locking drawers or as a plain base cabinet with adjustable shelf. These tables are designed for use at sitting height. They are finished with a chemical resistant, earth-friendly UV finish. This unit is available with our complete line of top materials to satisfy every requirement or budget.

1" Solid Epoxy is resistant to normal laboratory chemicals and heat. It's monolithic composition eliminates delamination. It is simple to clean and has no effect when subjected to common laboratory chemicals. This black top includes 4" backsplash.

1" Solid Epoxy is resistant to normal laboratory chemicals and heat. It's monolithic composition eliminates delamination. It is simple to clean and has no effect when subjected to common laboratory chemicals. This black top includes 4" backsplash.

Receives the tapered end of 3/4" uprights.

A versatile fume hood that can be used in multiple classrooms. This ductless fume hood has an all-inclusive filter that handles liquids, gases and solid chemicals. This unit is so flexible, it does not require ducting (saves energy) and plugs into an ordinary outlet. Each unit comes with Smart TechnologyTM – an exclusive set of tools that is comprised of smart-light communicationTM, chemical sensors, real-time status, and the eGuard app. Smart-light communication is a soft band of light on the unit that lets you know the unit is operating safely. The band of light will slowly pulse to let you know if the airflow is compromised, if there is a fan failure, or there it is time to change your filters. The fume hood part of the unit is enclosed by 5/16" thick acrylic so a teacher can demonstrate while students surround the hood. The metallic parts are anti-corrosion metallic alloy protected by a thermo-hardened anti-acid polymer coating. The internal hood dimensions are 30-1/8"W x 23"D x 32"H; external dimensions are 31-1/2"W x 25"D x 45-1/4"H. Overall dimensions are: 32-3/8"W x 27-1/4"D x 81-1/2"H. Unit comes with an air flow meter, flow monitor, sampling port, programmable timer, energy ports, one filter (2-year average life) and a list of approved chemicals. A separate filter must be ordered. Filter type is determined by the results of the Valiquest Chemical Questionnaire. Fume hood comes standard with an internal light fixture. The fume hood is mounted to a 27-1/4"D x 32-3/8"W x 36"H oak cabinet. It provides an easy way to move the fume hood within a room or school. It rolls easily on 4" casters and has two drawers, two pull-out lipped shelves lined with a chemical resistant liner. The unit is finished in natural oak with an earth-friendly chemical resistant UV finish. Erlab hoods require filters be selected according to individual applications (Must get the Valiquest Chemical Questionnaire form completed prior to purchase and it will determine which model you will receive. On rare occasions results may also require purchase of a HEPA filter). Your specifications will be analyzed and validated by Erlab's PhD chemist, ensuring your safety. Please contact customer service with questions. Overall dimensions: 81-1/2"H x 32-3/8"W x 27-1/4"D. 

A versatile fume hood that can be used in multiple classrooms. This ductless fume hood has an all-inclusive filter that handles liquids, gases and solid chemicals. This unit is so flexible, it does not require ducting (saves energy) and plugs into an ordinary outlet. Each unit comes with Smart TechnologyTM – an exclusive set of tools that is comprised of smart-light communicationTM, chemical sensors, real-time status, and the eGuard app. Smart-light communication is a soft band of light on the unit that lets you know the unit is operating safely. The band of light will slowly pulse to let you know if the airflow is compromised, if there is a fan failure, or there it is time to change your filters. The fume hood part of the unit is enclosed by 5/16" thick acrylic so a teacher can demonstrate while students surround the hood. The metallic parts are anti-corrosion metallic alloy protected by a thermo-hardened anti-acid polymer coating. The internal hood dimensions are 30-1/8"W x 23"D x 32"H; external dimensions are 31-1/2"W x 25"D x 45-1/4"H. Overall dimensions are: 32-3/8"W x 27-1/4"D x 81-1/2"H. Unit comes with an air flow meter, flow monitor, sampling port, programmable timer, energy ports, one filter (2-year average life) and a list of approved chemicals. A separate filter must be ordered. Filter type is determined by the results of the Valiquest Chemical Questionnaire. Fume hood comes standard with an internal light fixture. The fume hood is mounted to a 27-1/4"D x 32-3/8"W x 36"H oak cabinet. It provides an easy way to move the fume hood within a room or school. It rolls easily on 4" casters and has two drawers, two pull-out lipped shelves lined with a chemical resistant liner. The unit is finished in natural oak with an earth-friendly chemical resistant UV finish. Erlab hoods require filters be selected according to individual applications (Must get the Valiquest Chemical Questionnaire form completed prior to purchase and it will determine which model you will receive. On rare occasions results may also require purchase of a HEPA filter). Your specifications will be analyzed and validated by Erlab's PhD chemist, ensuring your safety. Please contact customer service with questions. Overall dimensions: 81-1/2"H x 32-3/8"W x 27-1/4"D. 

A versatile fume hood that can be used in multiple classrooms. This ductless fume hood has an all-inclusive filter that handles liquids, gases and solid chemicals. This unit is so flexible, it does not require ducting (saves energy) and plugs into an ordinary outlet. Each unit comes with Smart TechnologyTM – an exclusive set of tools that is comprised of smart-light communicationTM, chemical sensors, real-time status, and the eGuard app. Smart-light communication is a soft band of light on the unit that lets you know the unit is operating safely. The band of light will slowly pulse to let you know if the airflow is compromised, if there is a fan failure, or there it is time to change your filters. The fume hood part of the unit is enclosed by 5/16" thick acrylic so a teacher can demonstrate while students surround the hood. The metallic parts are anti-corrosion metallic alloy protected by a thermo-hardened anti-acid polymer coating. The internal hood dimensions are 30-1/8"W x 23"D x 32"H; external dimensions are 31-1/2"W x 25"D x 45-1/4"H. Overall dimensions are: 32-3/8"W x 27-1/4"D x 81-1/2"H. Unit comes with an air flow meter, flow monitor, sampling port, programmable timer, energy ports, one filter (2-year average life) and a list of approved chemicals. A separate filter must be ordered. Filter type is determined by the results of the Valiquest Chemical Questionnaire. Fume hood comes standard with an internal light fixture. The fume hood is mounted to a 27-1/4"D x 32-3/8"W x 36"H oak cabinet. It provides an easy way to move the fume hood within a room or school. It rolls easily on 4" casters and has two drawers, two pull-out lipped shelves lined with a chemical resistant liner. The unit is finished in natural oak with an earth-friendly chemical resistant UV finish. Erlab hoods require filters be selected according to individual applications (Must get the Valiquest Chemical Questionnaire form completed prior to purchase and it will determine which model you will receive. On rare occasions results may also require purchase of a HEPA filter). Your specifications will be analyzed and validated by Erlab's PhD chemist, ensuring your safety. Please contact customer service with questions. Overall dimensions: 81-1/2"H x 32-3/8"W x 27-1/4"D. 

A versatile fume hood that can be used in multiple classrooms. This ductless fume hood has an all-inclusive filter that handles liquids, gases and solid chemicals. This unit is so flexible, it does not require ducting (saves energy) and plugs into an ordinary outlet. Each unit comes with Smart TechnologyTM – an exclusive set of tools that is comprised of smart-light communicationTM, chemical sensors, real-time status, and the eGuard app. Smart-light communication is a soft band of light on the unit that lets you know the unit is operating safely. The band of light will slowly pulse to let you know if the airflow is compromised, if there is a fan failure, or there it is time to change your filters. The fume hood part of the unit is enclosed by 5/16" thick acrylic so a teacher can demonstrate while students surround the hood. The metallic parts are anti-corrosion metallic alloy protected by a thermo-hardened anti-acid polymer coating. The internal hood dimensions are 30-1/8"W x 23"D x 32"H; external dimensions are 31-1/2"W x 25"D x 45-1/4"H. Overall dimensions are: 32-3/8"W x 27-1/4"D x 81-1/2"H. Unit comes with an air flow meter, flow monitor, sampling port, programmable timer, energy ports, one filter (2-year average life) and a list of approved chemicals. A separate filter must be ordered. Filter type is determined by the results of the Valiquest Chemical Questionnaire. Fume hood comes standard with an internal light fixture. The fume hood is mounted to a 27-1/4"D x 32-3/8"W x 36"H oak cabinet. It provides an easy way to move the fume hood within a room or school. It rolls easily on 4" casters and has two drawers, two pull-out lipped shelves lined with a chemical resistant liner. The unit is finished in natural oak with an earth-friendly chemical resistant UV finish. Erlab hoods require filters be selected according to individual applications (Must get the Valiquest Chemical Questionnaire form completed prior to purchase and it will determine which model you will receive. On rare occasions results may also require purchase of a HEPA filter). Your specifications will be analyzed and validated by Erlab's PhD chemist, ensuring your safety. Please contact customer service with questions. Overall dimensions: 81-1/2"H x 32-3/8"W x 27-1/4"D. 

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 62", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Hexagonal workstation designed to be used with standard 36" laboratory tables. This unit features an epoxy resin top with a drop-in hexagonal lipped sink. Apron and pedestal are constructed of solid hardwoods, and oak veneers, with a chemical resistant, earth-friendly UV finish. Equipped with three combination cold water/gas fixtures and three GFI duplex receptacles. The center pedestal has a removable panel to access utilities. Unit is also available in a flat top version without the sink and fixtures.

Hexagonal workstation designed to be used with standard 36" laboratory tables. This unit features an epoxy resin top with a drop-in hexagonal lipped sink. Apron and pedestal are constructed of solid hardwoods, and oak veneers, with a chemical resistant, earth-friendly UV finish. Equipped with three combination cold water/gas fixtures and three GFI duplex receptacles. The center pedestal has a removable panel to access utilities. Unit is also available in a flat top version without the sink and fixtures.

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 62", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

Created of solid hardwood/oak veneers, and finished with a chemical resistant, earth-friendly UV finish. Both units provide ample space for 4 people and are available in 56" or 52", solid 1" epoxy resin or phenolic resin tops. The pedestal with apron comes equipped with 4 drawers, the drawer cabinet unit comes equipped with 16 drawers. Both units come with 4 GFI AC duplex receptacles, and can be ordered with these options: two combination cold water/gas fixtures, 4 rod sockets and , a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The 62"W units with drawers have 2 pulls per drawer. Easily accessible to the utilities. All unis are 36"H. (Shipped KD; FOB Wisconsin, 54174)

A new concept in instructor's desk….versatile and featuring the innovative cured front. This oak plywood cabinet has a modern curved front with a traditional desk on the teacher side. The curved front section is designed to store and display a 40" television (not included). The TV can be viewed by raising the mount with either a push button or the provided remote. As the TV rises from the desk, a portion of the phenolic top lifts away. When the TV is recessed into the cabinet, the top can be closed providing extra work space. The curved portion of the desk is 36"H and 20"D. The back portion of the desk includes two cabinets and a 36"W knee space. Your choice of cabinets allows for storage and services. The option with a sink comes with a black epoxy sink and a cold water/gas fixture faucet. All drawers and doors have locks. The drawers are dovetailed on all four sides. Back portion of the desk is 33"H and 20"D. The overall size of the curved instructor's desk is 72"W x 40"D x 36"H. Finishing the desk is rubber base molding and a chemical resistant UV finish. Top is 3/4" solid phenolic resin.

A new concept in instructor's desk….versatile and featuring the innovative cured front. This oak plywood cabinet has a modern curved front with a traditional desk on the teacher side. The curved front section is designed to store and display a 40" television (not included). The TV can be viewed by raising the mount with either a push button or the provided remote. As the TV rises from the desk, a portion of the phenolic top lifts away. When the TV is recessed into the cabinet, the top can be closed providing extra work space. The curved portion of the desk is 36"H and 20"D. The back portion of the desk includes two cabinets and a 36"W knee space. Your choice of cabinets allows for storage and services. The option with a sink comes with a black epoxy sink and a cold water/gas fixture faucet. All drawers and doors have locks. The drawers are dovetailed on all four sides. Back portion of the desk is 33"H and 20"D. The overall size of the curved instructor's desk is 72"W x 40"D x 36"H. Finishing the desk is rubber base molding and a chemical resistant UV finish. Top is 3/4" solid phenolic resin.

A new concept in instructor's desk….versatile and featuring the innovative cured front. This oak plywood cabinet has a modern curved front with a traditional desk on the teacher side. The curved front section is designed to store and display a 40" television (not included). The TV can be viewed by raising the mount with either a push button or the provided remote. As the TV rises from the desk, a portion of the phenolic top lifts away. When the TV is recessed into the cabinet, the top can be closed providing extra work space. The curved portion of the desk is 36"H and 20"D. The back portion of the desk includes two cabinets and a 36"W knee space. Your choice of cabinets allows for storage and services. The option with a sink comes with a black epoxy sink and a cold water/gas fixture faucet. All drawers and doors have locks. The drawers are dovetailed on all four sides. Back portion of the desk is 33"H and 20"D. The overall size of the curved instructor's desk is 72"W x 40"D x 36"H. Finishing the desk is rubber base molding and a chemical resistant UV finish. Top is 3/4" solid phenolic resin.

A new concept in instructor's desk….versatile and featuring the innovative cured front. This oak plywood cabinet has a modern curved front with a traditional desk on the teacher side. The curved front section is designed to store and display a 40" television (not included). The TV can be viewed by raising the mount with either a push button or the provided remote. As the TV rises from the desk, a portion of the phenolic top lifts away. When the TV is recessed into the cabinet, the top can be closed providing extra work space. The curved portion of the desk is 36"H and 20"D. The back portion of the desk includes two cabinets and a 36"W knee space. Your choice of cabinets allows for storage and services. The option with a sink comes with a black epoxy sink and a cold water/gas fixture faucet. All drawers and doors have locks. The drawers are dovetailed on all four sides. Back portion of the desk is 33"H and 20"D. The overall size of the curved instructor's desk is 72"W x 40"D x 36"H. Finishing the desk is rubber base molding and a chemical resistant UV finish. Top is 3/4" solid phenolic resin.

Complete demonstration center constructed of solid oak, oak hardwood and oak veneers. It is finished with a chemical resistant, earth-friendly UV finish. Included are four drawers (three small, one file), and a large cupboard. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. All units come with a GFI protected AC duplex receptacle. You can order with/without these options: combination cold water/gas fixtures, and polypropylene trap. Comes standard with pull-out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Dimensions: Overall: 60"L x 30"D x 36"H, Knee space: 22"W x 32-1/2"D, Pull-out: 3/4"H x 16-1/4"W x 25-1/4"D, Small Drawers: 13-1/2"W x 18"D x 4"H, file Drawer: 13-1/2"W x 18"D x 10-1/4"H, Cupboard: 19-1/2"W x 28"D x 29-1/2"H